Hardware

Camera

The Camera module's schematic and board, KDCMR001 revision 1.0, viewable here and downloadable as KiCad sources.

What it is

The Camera module carries the 24-pin FPC connector for the OV5640, two regulators for its 1.5 V core and 2.8 V analogue supplies, a 24 MHz oscillator, the reset and power-down network, and the I2C pull-ups. Two copper layers. The module's page, modules/camera, says what it does and which GPIO is which; this page is the schematic.

Revision 1.0, released 2026-09-14, drawn in KiCad 10. Symbols, footprints and 3D models come from Kode's shared hardware library.

Schematic

Zoom with the wheel, drag to pan, and switch sheets from the toolbar.

Each sheet, as a plain image:

• Main
• Sensor
• Project architecture
• Revision History
• Cover

Files

The schematic sources, as published here. Open the .kicad_pro in KiCad 10 with the sheets beside it. The cover sheet's embedded fonts were removed from these copies and the project's text variables written in; the design is unchanged. The board layout is not published.

• camera_module.kicad_sch
• main.kicad_sch
• project_architecture.kicad_sch
• revision_history.kicad_sch
• sensor.kicad_sch
• camera_module.kicad_pro

TBD: the manufacturing package (Gerbers, drills, BOM, positions) and the licence the files are published under.